MAGEWELL Pro Convert AES67 A multi-format IP audio converter and capture device

• Offers a seamless bridge between analog audio, software and IP standards including AES67, NDI^®, SRT and more
• Provides a flexible, virtual audio matrix to allow routing or mixing of any analog or IP-based input channel to any output
• Enables mixed-technology local and remote production workflows and ProAV installations

Receiving/Input Features:
• Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
• 1 x 2-channel 3.5mm TRS unbalanced in (5k Ohm)
• 1 x 2-channel 4.4mm TRRRS balanced in (20k Ohm)
• 1 x 4-channel 24-bit/48k USB Audio Class in
• Receiving 4 x 8-channel 24-bit AES67 (compatible with SMPTE ST 2110–30) streams both multicasted and unicasted
• Receiving 1 x 4-channel 16-bit Network audio stream with Icecast, SRT, or NDI protocol, via Ethernet
• Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
• Dynamic range > 100dB
• Signal to noise ratio > 100dB
• Total harmonic distortion < 0.01% @ +4dBu
• Support for PTP master/slave
• Max signal level: unbalanced at 12dBu, balanced at 24dBu
• Device buffer at 0.125 ~ 64 ms (controlled via WebUI, 1 to 16 packets with packet time at 0.125/0.25/0.333/1/4 ms)

Sending/Output Features:
• Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
• 1 x 2-channel 3.5mm TRS unbalanced out (10 Ohm)
• 1 x 2-channel 4.4mm TRRRS balanced out (150 Ohm)
• 1 x 4-channel 24-bit/48k UAC out
• Multicast (IGMPv2) and unicast up to 8 x 8-channel 24-bit AES67 (SMPTE ST 2110–30 compliant) streams
• Encoding and transmitting 1 x 4-channel 16-bit audio stream with Icecast, SRT, and NDI protocol
• Support for PTP master/slave
• Total harmonic distortion < 0.01% @ +4dBu
• Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
• Dynamic range > 100dB
• Signal to noise ratio > 100dB
• Max signal level: unbalanced at 12dBu, balanced at 18dBu

Configuration Management:
• Registration with Magewell Cloud
• Remote control via WebUI and Magewell Cloud
• Provision of comprehensive information regarding the device and signals in real-time
• Configuration of how an input is processed and encoded, including sampling, packets, PTPv2(IEEE 1588–2008),
channel adjustment, audio mixing, buffer, as well as the network connection
• Support for updating firmware
• Support for USB RNDIS/ECM
• Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
• Provision of HTTP APIs

Interfaces:
• 10/100/1000Mbps with PoE (IEEE 802.3af)
• USB2.0 Type B
– 5V/2.1A power supply
– USB NET
• 3.5mm TRS unbalanced IN/OUT
• 4.4mm TRRRS balanced IN/OUT

LED Indicators:
• Power LED indications:
– on: power on
– off: power off
• PTP LED indications:
– on: synced
– off: not synced
– blinking: syncing

Form Factor:
• 100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories:
• 4.4mm to Dual XLR Male Cable
• 4.4mm to Dual XLR Female Cable
• USB 2.0 cable (Type A to Type B)
• Universal power adapter
• L bracket

On-board Control Buttons:
• 16 Position Rotary DIP Switch: sets board-index from 0 to F

Screw Mounting Hole:
• ¼–20 threaded hole

Power Consumption:
• 5V max current: ~ 1 A
• Max power consumption: ~ 5 W

Working Environment:
• Operating temperature: 0 to 40 deg C
• Storage temperature: –20 to 70 deg C
• Relative humidity: 5% to 90% non-condensing