MAGEWELL Pro Convert SDI TX Converts one-channel of 3G-SDI input signal into Full NDI®

• Supports up to 2048×1080 60fps input signals
• Connects existing source equipment into NDI-enabled, IP-based media networks
• Plug-and-play ease of use with automatic input format detection and DHCP network configuration

Input Features:
• Max video input: 2048×1080 60fps. Supported resolutions include:
– 2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
– 2048x1080i/1920x1080i 23.98/24/25/29.97/30/47.95/48/50/59.94/60
– 1280x720p 50/59.94/60
– 720×576 25p/50i (PAL SD)
– 720×480 29.97p/59.94i (NTSC SD)
• Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth
• Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
• Support RGB, YUV BT.601/709/2020 video input
• 16-channel SDI embedded audio inputs
• SD/HD/3G-SDI BNC input
• Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
• Receive 3G-SDI transmitted up to 180m (591ft)

NDI® Encoding Features:
• Encoding Full NDI real-time stream at up to 2048×1080 60fps 4:2:2 8-bit
• Output the same resolution as input or any custom resolution. Typical outputs include:
– 2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
– 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60
– 1280x720p 50/59.94/60
• Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
• Encoding 16-channel NDI-embedded audio
• Support NDI 5.x

Configuration Management:
• Register with Magewell Cloud
• Remote control via WebUI and Magewell Cloud
• Provide comprehensive information regarding the device and signals in real-time
• Allow to configure how an input is processed and encoded, including deinterlacing, up/down scaling, frame rate,
aspect ratio, as well as the network connection
• Update firmware
• Support USB RNDIS/ECM
• Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
• Provide HTTP APIs

On-board Control Buttons:
• 16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control:
• Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
• Mini-DIN–8 jack (shared with Tally light)

Network Interfaces:
• 10/100/1000Mbps Ethernet
• IEEE 802.3af PoE

USB Interface:
• USB2.0 Type B
– 5V/2.1A power supply
– USB RNDIS/ECM

Supported Products:
• NDI Studio Monitor
• OBS
• vMix
• Any other NDI-enabled product

LED Indicators:
• Status LEDs indicate:
– Power supply: on/off
– Input signal: locked/unlocked

Form Factor:
• 100.9mm (L) x 60.2mm (W) x 23.3mm (H)

Accessories:
• USB 2.0 A to B cable
• 5V/2.1A power adaptor
• Mini-DIN 8 breakout cable
• Tally light
• L-bracket

Screw Mounting Hole:
• ¼–20 threaded hole

Power Consumption:
• 5V max current: ~1.5A
• Max power consumption: ~7W

Working Environment:
• Operating temperature: 0 to 40 deg C
• Storage temperature: –20 to 70 deg C
• Relative humidity: 5% to 90% non-condensing